To Vary The Speed Setting :: Normal (Fixed Speed) Cruise Control Mode :: Adaptive Cruise Control (ACC) — If Equipped :: Understanding The Features Of Your Vehicle :: Chrysler 300 Owners Manual :: Chrysler 300 - Chryclub.com

To Vary The Speed Setting

Chrysler 300 / Chrysler 300 Owners Manual / Understanding The Features Of Your Vehicle / Adaptive Cruise Control (ACC) — If Equipped / Normal (Fixed Speed) Cruise Control Mode / To Vary The Speed Setting

There are two ways to change the set speed:

• Use the accelerator pedal to adjust the vehicle to the desired speed and press the SET - button.

• Tap the RES + or SET - button to increase or decrease the set speed in 1 mph (1.6 km/h) increments respectively.

Hold the RES + or SET - button for 5 mph (8 km/h) increments.

See also:

Emissions Inspection And Maintenance Programs
In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration. For states that requir ...

To Disable RKE Transmitter Linked To Memory
1. Turn the ignition switch to the OFF position and remove the key. 2. Press and release MEMORY button 1. The system will recall any memory settings stored in position 1. Wait for the system to ...

Gross Axle Weight Rating (GAWR)
The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. Refer to “Ve ...