Base System
The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the Receiver Module.
NOTE:
It is particularly important for you to check the
tire pressure in all of the tires on your vehicle monthly
and to maintain the proper pressure.
The TPMS consists of the following components:
• Receiver Module
• Four Tire Pressure Monitoring Sensors
• Tire Pressure Monitoring Telltale Light
See also:
Fluid Level Check – Four-Speed Automatic Transmission
Use the following procedure to check the automatic
transmission fluid level properly:
1. Park the vehicle on level ground.
2. Run the engine at curb idle speed for a minimum of
60 seconds.
3. A ...
Brake Assist System (BAS)
This system complements the ABS by optimizing the
vehicle braking capability during emergency brake maneuvers.
This system detects an emergency braking situation
by sensing the rate and amount of ...
2011 Chrysler 300 Review by Kelsey Mays
The redesigned 2011 Chrysler 300 is not as distinctive as its predecessor,
and it misses its target in a few areas, but overall it's the best example yet
that Chrysler is back on track.
The full ...