Jump-Starting Procedure

If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.

NOTE:
When using a portable battery booster pack follow the manufacturer’s operating instructions and precautions.

CAUTION!
Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur.

WARNING!
Do not attempt jump-starting if the battery is frozen.
It could rupture or explode and cause personal injury.

See also:

SCAN Button
Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before continuing to the next. To stop the search, press the SCAN button a second time. ...

Changing FCW Status
The FCW feature can be set to far, set to near or turned off using the Uconnect Touch™ System, refer to “Uconnect Touch™ Settings” in “Understanding Your Instrument Panel” for furthe ...

Doors & Locks
After pressing the Doors & Locks soft-key the following settings will be available. • Auto Unlock On Exit When this feature is selected, all doors will unlock when the vehicle is stopped a ...