Operation – 5.7L Engine

When the shift lever is in the DRIVE position, the transmission will operate automatically, shifting between the five available gears. To engage AutoStick , simply move the shift lever to the right or left (+/-) while in the DRIVE position, or tap one of the steering wheelmounted shift paddles (+/-), if equipped. When AutoStick is active, the current transmission gear is displayed in the instrument cluster. In AutoStick mode, the transmission will shift up or down when (+/-) is manually selected by the driver (using the shift lever, or the shift paddles [if equipped]), unless an engine lugging or overspeed condition would result. It will remain in the selected gear until another upshift or downshift is chosen, except as described below.

• If AutoStick is engaged while in DRIVE mode, the transmission will automatically shift up when maximum engine speed is reached.

• If AutoStick is engaged while in SPORT mode, the transmission will remain in the selected gear even when maximum engine speed is reached. The transmission will upshift only when commanded by the driver.

• The transmission will automatically downshift as the vehicle slows down (to prevent engine lugging) and will display the current gear.

• The transmission will automatically downshift to first gear when coming to a stop. After a stop, the driver should manually upshift (+) the transmission as the vehicle is accelerated.

• Heavily pressing the accelerator pedal will generate an automatic downshift (for improved acceleration) when reasonable.

• You can start out in first or second gear. Tapping (+) (at a stop) will allow starting in second gear. Starting out in second gear is helpful in snowy or icy conditions.

• The system will ignore attempts to upshift at too low of a vehicle speed.

• Avoid using speed control when AutoStick is engaged.

• Transmission shifting will be more noticeable when AutoStick is engaged.

To disengage AutoStick mode, hold the shift lever to the right or press and hold the (+) shift paddle (if equipped) until “D” is once again displayed in the instrument cluster. You can shift in or out of the AutoStick mode at any time without taking your foot off the accelerator pedal.

WARNING!
Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury.

    See also:

    Hazard Warning Flashers
    The Hazard Warning flasher switch is located in the center of the instrument panel between the center air outlets. Press the switch to turn on the Hazard Warning flashers. When the switch is ...

    E-85 Usage In Non-Flex Fuel Vehicles
    Non-FFV vehicles are compatible with gasoline containing 10% ethanol (E10). Gasoline with higher ethanol content may void the vehicle’s warranty. If a Non-FFV vehicle is inadvertently fueled wi ...

    Glass Surfaces
    All glass surfaces should be cleaned on a regular basis with MOPAR Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the ...