To Activate
Push the ON/OFF button. The Cruise Indicator Light in the Electronic Vehicle Information Center (EVIC) will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator Light will turn off. The system should be turned off when not in use.
WARNING!
Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system OFF when you are not using it.
See also:
Third Row Swivel Screen (If Equipped)
• The third row screen or Screen 2 has the ability to
lower and swivel to face forward.
• While the swivel screen is facing forward, the second
row screen or Screen 1 must be fully open in or ...
Manual Compass Calibration — If Equipped
If the compass appears erratic and the CAL indicator
does not appear in the EVIC display, you must put the
compass into the Calibration Mode manually, as follows:
1. Turn ON the ignition switch.
...
Replacement Bulbs
Interior Bulb Number
Rear Courtesy/Reading Lamps . . . . . . . . . . . . . W5W
Rear Compartment (Trunk) Lamp . . . . . . . . . . . . . 562
Overhead Console Reading Lamps . . . . . . . . . . . . 578 ...