Cancel Command
At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu.
You can also press the or buttons when the system is listening for a command and be returned to the main or previous menu.
NOTE:
Pressing the or
buttons while the
system is playing is known as “Barging In”, refer to
“Barge In — Overriding Prompts” for further
information.
See also:
Preparations For Jump-Start
The battery in your vehicle is located between the left
front headlight assembly and the left front wheel splash
shield. To allow jump-starting there are remote battery
posts located on the left ...
Vehicles Not Equipped With Keyless Enter-N-Go
1. Turn the ignition switch to the ON/RUN position (Do
not start the engine.)
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the O ...
TUNE Control (Rotary)
Turn the rotary TUNE/SCROLL control knob clockwise
to increase or counterclockwise to decrease the channel. ...