How To Use Remote Start

All of the following conditions must be met before the engine will remote start:
• Shift lever in PARK
• Doors closed
• Hood closed
• Trunk closed
• HAZARD switch off
• BRAKE switch inactive (brake pedal not pressed)
• Battery at an acceptable charge level
• RKE PANIC button not pressed.
• System not disabled from previous remote start event
• Vehicle theft alarm not active
• Ignition in OFF position

WARNING!
• Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous and can cause serious injury or death when inhaled.
• Keep Remote Keyless Entry (RKE) transmitters away from children. Operation of the Remote Start System, windows, door locks or other controls could cause serious injury or death.

See also:

Automatic Temperature Control (ATC)
ATC Hard-keys are located in the center of the instrument panel. Soft-keys are accessible on the Uconnect Touch™ system screen. ...

To Resume Speed
Press the RES + button and release. Then remove your foot from the accelerator pedal. The EVIC will display the last set speed. NOTE: You can resume ACC from a minimum of 20 mph (32 km/h). WA ...

Hazard Warning Flashers
The Hazard Warning flasher switch is located in the center of the instrument panel between the center air outlets. Press the switch to turn on the Hazard Warning flashers. When the switch is ...