Disc Errors

If the DVD player is unable to read the disc, a Disc Error message is displayed on the VES™ and Radio displays and the disc is automatically ejected.Adirty, damaged, or incompatible disc format are all potential causes for a Disc Error message.

If a disc has a damaged track which results in audible or visible errors that persists for 2.0 seconds, the DVD player will attempt to continue playing the disc by skipping forward 1.0 to 3.0 seconds at a time. If the end of the disc is reached, the DVD player will return to the beginning of the disc and attempt to play the start of the first track.

The DVD player may shut down during extremely hot conditions, such as when the vehicle’s interior temperature is above 120°F. When this occurs, the DVD player will display VES High Temp and will shut off the VES™ displays until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player.

    See also:

    Changing FCW Status
    The FCW feature can be set to far, set to near or turned off using the Uconnect Touch™ System, refer to “Uconnect Touch™ Settings” in “Understanding Your Instrument Panel” for furthe ...

    Trailer Towing
    In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer, carefully review this information to t ...

    Power Windows
    You can control either the front or rear windows using switches located on the driver’s door trim panel. The switches will operate only when the ignition switch is in the ON/RUN or ACC positio ...