Turning Parkview On Or Off — With Navigation/Multimedia Radio


 

1. Press the “menu” hard-key.

2. Select “system setup” soft-key.

3. Press the “camera setup” soft-key.

4. Enable or disable the rear camera feature by selecting “enable rear camera in reverse” soft-key.

5. Press the “save” soft-key.

    See also:

    Activating Adaptive Cruise Control (ACC)
    You can only activate ACC if the vehicle speed is above 20 mph (32 km/h). When the system is turned on and in the READY state, the Electronic Vehicle Information Center (EVIC) displays “Adapt ...

    E-85 Usage In Non-Flex Fuel Vehicles
    Non-FFV vehicles are compatible with gasoline containing 10% ethanol (E10). Gasoline with higher ethanol content may void the vehicle’s warranty. If a Non-FFV vehicle is inadvertently fueled wi ...

    Automatic Compass Calibration
    This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new, the compass may appear erratic and the EVIC will display CAL until the compass ...